Basic Functions on Control Display
NOTICE:
•
If
Nonstop
mode
is selected, the dehumidifier will operate continuously at its maximum
dehumidification settings if attached to a hose to drain or until the bucket is full.
•
For drier air, press the - button and set to a lower percentage value (%).
•
For damper air, press the + button and set to a higher percentage value (%).
•
When you first use the dehumidifier, set the humidity control to 45% or 50%.
•
Allow at least 24 hours for the dehumidifier to achieve the humidity level.
•
If you still have damper air than desired, set the humidity level to a lower setting or select
Nonstop
mode for maximum dehumidification.
4.
DISPLAY
Shows the set % humidity level while setting, then shows the actual (± 5% accuracy) room % humidity level.
5.
FAN SPEED
Controls the fan speed.
Press the button to select either High, Medium or Low fan speed.
Set the fan control to High for maximum humidity removal. When the humidity has been reduced and quiet
operation is preferred, set the fan control to Medium or Low.
6.
TIMER
While the dehumidifier is in operation, press the button TMER to set it to automatically turn off in 2 hours
or 4 hours.
While the dehumidifier is off, press the button TMER to set it to automatically turn on in 2 hours or 4 hours.
