16
6 Simple weighing
After connecting the power, the green status LED on the left side of the device will light up.
This phase will last about 20 seconds, and the display will remain off all the time. After the
data loading phase, a screen will show the capacity and resolution of the balance. Then the
device will be placed in the simple weighing screen.
At first power on, the device starts by activating the default user with the factory settings.
In the weighing screen, the area displaying the
weight shows the value of the weight on the
weighting plate.
Use the
-0-
key to set a new zero point and reset
all tare values.
If you work with weighing boxes, first zero the
balance. Place the container and press the
“
-T-
”
key.
Or use the
T Man
key to enter a known tare value
manually.
The
Net
symbol on the display indicates the net
weight. Press
“Net”
to see the gross weight
“Lrd”
.
“
T= “
indicates the tare value captured.
