18
Model XGH2O
Timer Programming –
24 Hour / 7 Day
Setting the Clock
1. Press and hold the CLOCK button.
2. Press and hold the DAY button until the display
shows the current day.
3. Press the HOUR button until the display shows the
current hour.
4. Press the MIN (minute) button until the display
shows the current minute.
Setting the Programs
1. Press the PROG (program) button once. You will
now set the time in which you want the wash to
start. The number 1 in the lower left hand corner
indicates that you are now programming Event 1.
2. Press the DAY button repeatedly until the display
shows the day(s) when you want the timer to turn
on. The options are:
-
Days of the week
MO, TU, WE, TH, FR, SA, SU
- Individual days of the week
MO etc.
-
Weekdays only
MO, TU, WE, TH, FR
-
Weekends only
SA, SU
3. Press the HOUR and MIN (minute) buttons to set
the time when you want the timer to turn on.
4. Press the PROG (program) button again.
5. Repeat steps 2-4 to set the OFF time for Event 1.
This should be set one minute after the ON time.
6. When programming is complete, press the CLOCK
button to display the current time.
Things you should know about programming events:
• You can repeat the ON and OFF programming
procedures outlined above for up to seven (7)
events as needed.
NOTE
While setting events, the timer may prematurely turn
on the load, if you press the
MODE
button.
• Three kinds of settings can cause the timer to
work in an unexpected way:
a. Set up events in progressive order of time, for
example:
8:00 pm ON, 9:00 pm ON, 10:00 pm ON
Not
8:00 pm ON, 10:00 pm ON, 9:00 pm ON
b. Do not overlap event times, for example:
8:00 pm ON / 12:00 pm OFF and
9:00 pm ON / 11:00 pm OFF
c. Set the OFF time for one minute after the ON
time.
Reviewing Events Programmed
In your current time display, press the PROG (program)
button repeatedly to check your settings.
When finished, press the CLOCK button to return the
display to the time of day.
Clearing (Deleting an Event)
1. Press the PROG (program) button as many times
as necessary to locate the setting you want to
clear.
2. Press and hold the MODE button.
3. Press the PROG button to clear the setting.
4. When finished, press the CLOCK button to return
the display to the time of day.
Operating the Time Switch
Press the MODE button repeatedly to set the timer to
Automatic, Random or Manual mode.
NOTE
For the time switch to run programmed events, it
must be set to AUTO mode.
•
AUTO
runs all events automatically according to the
schedule you have set. The word AUTO appears in
the display.
•
RND
(random) runs all events in a RANDOM mode.
This is a security feature in which ON and OFF
times randomly /- 15 minutes from the
programmed times, creating a more “lived-in” look.
The word RND appears on the display.
NOTE
Do NOT set this timer to RND mode. It will not wash
at the exact time you programmed.
•
MANUAL
turns ON and OFF only when the user
presses the ON or OFF button. The display is blank,
showing neither RND or AUTO.
Overriding Timer Settings
The ON or OFF buttons override the current
programmed events. To override the current program
(either ON or OFF), press the ON or OFF button.
