32
33
PRODUCT/BATTERY DISPOSAL
Used, fully-discharged batteries must be
disposed of in a specially labeled collection
container, at toxic waste collection points
or through an electrical retailer. You are under
legal obligation to dispose of batteries correctly.
Please dispose of the device in accordance with
the local regulations.
GLOSSARY OF SYMBOLS
Electrical devices are recyclable material
and should not be disposed of with
household waste after their useful life!
Help us to protect the environment
and save resources and take this device
to the appropriate collection points.
Please contact the organization which is
responsible for waste disposal in your area
if you have any questions.
Type BF Applied Part
Refer to instruction manual
The first number 2: Protected against
solid foreign objects of 12,5 mm and
greater. The second number: Protected
against vertically falling water drops
when enclosure tilted up to 15o.
Vertically falling drops shall have no
harmful effects when the enclosure is
tilted at any angle up to 15o on either
side of the vertical.
Represent manufacture date and serial
number.
This symbol means that this device
emits non-ionizing radiation. All devices
with RF transmitters or that use RF
electromagnetic energy must have a
label with this symbol.
IP22
SN
IMPORTANT INFORMATION REGARDING ELECTROMAGNETIC COMPATIBILITY (EMC)
CAUTION
1)
This product needs special precautions regarding EMC and needs to be installed and put into service
according to the EMC information provided, and this unit can be affected by portable and mobile RF
communications equipment.
2)
Do not use a mobile phone to make or receive phone calls or other devices that emit electromagnetic
fields, near the unit. This may result in incorrect operation of the unit.
3)
This machine should not be used adjacent to or stacked with other equipment and that if adjacent or
stacked use is necessary, this machine should be observed to verify normal operation in the configuration
in which it will be used.
GUIDANCE AND MANUFACTURER’S DECLARATION – ELECTROMAGNETIC EMISSIONS
AccuRelief™ electrical stimulators are intended for use in the electromagnetic environment specified below.
The customer or the user of these electrical stimulators should assure that it is used in such environment.
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The device uses RF energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any interference in nearby
electronic equipment.
ACRL3100_Manual_03.indd 32-33
10/31/18 4:41 PM