26
27
n
NEVER remove the electrode pads from the
skin while the device is still turned on.
n
If replacement electrodes are necessary, use
pads that are the same size (50*50mm) as the
ones provided with the ACRL-3100.
n
Use of electrode pads that are larger may
reduce the effect of the stimulation. Use of
pads that are much smaller than the electrodes
provided with the ACRL-3100 may increase
the chance of skin irritation or electrode burns
occurring under the electrodes.
n
ALWAYS
use electrode pads that have been
cleared for marketing in the US by the FDA.
n
ALWAYS
clean the electrode pads after your
treatment every time.
Storing the electrode pads
n
Place clean, dry pads on the plastic film and
then store in the sealed package at room
temperature between uses.
Storing the product
n
Store at room temperature in a dry place.
n
KEEP DEVICE AND ALL ACCESSORIES OUT
OF REACH OF CHILDREN.
CAUTION:
When remote is not in use
for a long period, remove the batteries
before storage, to avoid liquid discharge
from batteries.
n
Power Source: 3.0V DC, 2x AAA Batteries
n
Frequency: 2Hz~150Hz
n
Pulse Width: 30us~350us
n
Wave form: Biphasic square wave
n
Output Voltage: 0~45V (at 500 ohm load)
n
Output Intensity Level: 0~25 levels
n
Operating Conditions: 41°F~104°F (5°C~40°C);
30%RH~75%RH ;700hPa-1060hPa
n
Storage and transport conditions:
14°F~131° F (-10°C~55°C); 10%RH~90%RH;
700hPa-1060hPa
n
Size: 115mm x 53mm x 25mm
n
Weight: about 80g (without batteries)
n
Service life of the device: 3 years
n
Service life of electrode pads: Up to 30 times
SPECIFICATIONS
n
Service life of the battery: With new super
heavy duty batteries, approx. two weeks
when used for 30 min/day in Arm program
at 13 level intensity.
n
Applied part: Electrode
n
Size of electrode:
2 in. x 2 in. (50mm x 50mm)
n
IP classification system: IP22
ACRL3100_Manual_03.indd 26-27
10/31/18 4:41 PM