18
19
INSERTING BATTERIES
1. Remove the battery
cover on the back of the
device as shown by the
graphic to the right.
2. Insert 2xAAA batteries.
Make sure the positive
+ and negative – signs
correspond with the
markings in the device
when inserting batteries.
Reattach the battery cover
as shown by the graphic to the right.
NOTES:
n
Please use 2×AAA batteries in this TENS unit.
n
Remove the batteries if the device is not in use
for long periods of time.
n
Do not mix old and new batteries or different
types of batteries.
WARNING:
n
If batteries leak and come into contact with the
skin or eyes, wash immediately with copious
amounts of water.
n
Dispose of the used AAA batteries safely
according to local regulations.
n
If using a rechargeable battery, the life of a
rechargeable battery depends on the number
of recharging/rundown cycles it undergoes and
how these cycles are performed.
n
Whenever the device is not used frequently,
we recommend recharging the battery once a
month.
STEP 1 – Take the pads out of the sealed
package, attach pads to the lead wire
Lead wire snaps onto the connector in the middle
of the electrode pad.
STEP 2 – Insert lead wire into the TENS unit
Hold the lead wire plug and insert it into the
socket on the top of the stimulator.
STEP 3 – Electrode Pad Placement
Place electrodes pads on clean, dry and healthy
skin. Place pads at least 2 inches apart and no
further than 6 inches apart. (See pages 21-22.)
WARNING:
Replace the electrodes when
they are damaged or dirty, when they
have lost their adhesive power or when
stimulation becomes uncomfortable,
i.e. when you experience an unpleasant
stinging or biting sensation.
EASY STEPS TO GET STARTED WITH YOUR THERAPY WITH Electrode pads
ACRL3100_Manual_03.indd 18-19
10/31/18 4:41 PM