Accurate Technology Model 8, Руководство по установке

Страница: 75 / 132

OPERATION
When Manual Learn Screen is selected, a screen is displayed. Use
UP, DOWN, LEFT,
and RIGHT to move the four black bars to the outside edges of the screen. Initially, the
arrow keys control the top and left bars, as indicated by the bottom line of the text box.
To move the right and bottom bars, press
ENTER then use the arrow keys.
For each bar position being adjusted, watch the bar width as it moves closer to the screen
edge. lf the bar starts to overlap the screen border and reduce in width, move it back on:
increment so that it is displayed in its entirety. If the bar is as far as it will go and it is
displayed in its entirety, leave it at that position. lf you notice a geometry distortion
during Lead Screen, such as keystone or pincushion, use
GEOM to correct it.
When all bars have been adjusted, press
CONV to continue with the Learn Screen
operation. The remainder of the Learn Screen process is handled automatically by
ACON. Wait until it is complete, at which time the ACON Auto-convergence Menu is
returned.
If an error occurs during either of the Learn Screen functions, processing halts and an
error message is displayed. Refer to section 4.3,
Troubleshooting, for assistance. Also, if
during a Learn Screen you want to interrupt ACON, press EXIT. Shortly thereafter an
Exit dialog box will be displayed. Follow the screen instructions to exit or continue.
3.7 Utility Features
The projector's utility features allow you to customize operation of the projector to suit
your application and preferences. To access these features, press
UTIL. The Utilities
menu is displayed.
Item 1, Source Setup, provides utilities for setup memory manipulation and selection of
internal sources.
Item 2, Channel List, allows you to program the Channel List.
Item 3, Recall Memories, displays a listing of the Recall memories stored in the
projector.
3-31