Accurate Technology Model 8 страница 70 Скачать руководство пользователя | Manualshive

Страница: 70 / 132

background image

OPERATION

The following options are available while performing any of the manual convergence
routines:

Convergence on Image

When a convergence method is first selected, an internally generated crosshatch test
pattern is displayed. Alternatively, you may override the use of the test pattern and have
the external image displayed. Press

#

to cycle to the external image.

Convergence Reset

During convergence, the following reset options are available:
- Press

0

to reset red and blue convergence - static and dynamic.

- Press

1

to reset red and blue convergence - static only.

- Press

2

to reset red and blue convergence - dynamic only.

''Static'' refers to the complete image. ‘‘Dynamic’’ refers to a zonal area.

Note: Allow the projector to warm up for at least forty five minutes prior to

convergence

registration.

Guided Convergence

>

Press

1

from the Convergence menu to select Guided Convergence. An internally

generated crosshatch is displayed for the alignment. Initially, a red and green crosshatch
is displayed and a rectangular box surrounds the center convergence zone. Use

UP

,

DOWN, LEFT,

and

RIGHT

to move the red onto the green in the zone. Press

ENTER

to similarly move the blue onto the green. These first two adjustments adjust the position
of the red and blue images with respect to the green over the entire screen (static
adjustments). The adjustments to follow (dynamic), modify color positioning within
individual zones.

Press

ENTER

to move the rectangular box to the next convergence zone. Again, use the

arrow keys to adjust the red on the green. Press

ENTER

to adjust the blue on the green.

Within each zone, a central control point defines the position of each color within the
zone. You will notice that the center position within the box is most sensitive to the
adjustment. This is where the control point is located. Continue using

ENTER

to move to

the next zone/color for adjustment. lf you

3-26

«
...
68
69
70
71
72
...
»

Содержание Model 8





































































































































Отзывы:

Нет отзывов

Похожие инструкции для Model 8

Бренд: Qeedji Страницы: 52

Бренд: hager Страницы: 2

Бренд: Tripp Lite Страницы: 2

Бренд: BenQ Страницы: 2

Бренд: BenQ Страницы: 25

TouchMaster (MT-6

Бренд: Tripp Lite Страницы: 8

Бренд: BenQ Страницы: 84

Бренд: Optoma Страницы: 21

Бренд: Ricoh Страницы: 104

Бренд: Barco Страницы: 46

CineTheatre Galleria

Бренд: LP Morgan Страницы: 16

Бренд: LENCO Страницы: 148

Бренд: Eiki Страницы: 1

TheaterLite DXG-210

Бренд: Zenith Страницы: 13

Бренд: Optoma Страницы: 1

Бренд: Panasonic Страницы: 170

PTLB20VU-EC Operating

Бренд: Panasonic Страницы: 144

Бренд: LIGMAN Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды