Accurate Technology Model 8, Руководство по установке

Страница: 34 / 132

INSTALLATION & SETUP
(e.g.,
a SVGA card). When a source switch is made, the projector may automatically
select a Recall memory with matching scan frequencies or create the display settings
based on the settings in other setup memories. (Refer to Appendix C for ASI/ASR
logic
diagrams.)
Input Memory Setup >
Follow these steps to prepare an Input memory for a source.
Note: To assure proper setup of an existing Input memory, ASR must be off (default) for
the memory.
Step 1
Connect the source to the input to be set up, and then select the input using the Source
command. For example, if the source is connected to slot 1 of the projector, press
SOURCE 0 then 1 . If the Input memory did not previously exist, it will be created
automatically.
Step 2
The source should be displayed on the projection screen. If much adjustment is required,
press
UTIL 1 then 2 to perform an ASI with Save. The display appearance may improve
based on the settings stored in other setup memories. (If the Input memory is new, ASI
with Save will have already been performed when the input was selected.)
Step 3
Make display adjustments as required. Adjustment changes will automatically be saved in
the Input memory.
Recall Memory Setup >
Follow these steps to prepare a Recall memory.
Step 1
Select the input connected to the source. For example, if the source is connected to
switcher 1, slot 5, press
SOURCE 1 then 5 . The source should be displayed on the
projection screen.
Note: To assure proper setup of a Recall memory ASR must be off (default) for the
current input.
Step 2
Select a Recall memory as the current setup memory. For example, to make Recall
memory 03 the current setup memory, press
RECALL 0 then 3 . If the Recall memory
did not previously exist, it will be created automatically.
Step 3
If much adjustment is required, press UTIL 1 then 2 to perform an ''ASI with
Save''. (lf the Recall memory is new, ASI with Save will have already been performed
when the memory was selected.)
2-28