Accurate Technology Model 8, Руководство по установке

Страница: 48 / 132

OPERATION
Keypad Usage >
The keypad is used the same way you would use a remote keypad
supplied with a TV or VCR . There are only a few general key press rules to keep in
mind:
Key Press Rules
1) All key presses are in sequence; no functions require simultaneous key presses.
2)
POWER and STBY are the only keys which require an extended hold-down for
function activation (about one second). For all other keys, a momentary press will
activate the key's function.
3)
UP, DOWN, LEFT and RIGHT are the only keys, which repeat when held down. For
all other keys, the key most first be released then pressed again for repeated activation.
4) Pressing EXIT always exits the current function, operation, menu, or dialog
box.
Notes: 1) To toggle the keypad's backlit display (enable or disable), press * then BRITE
TINT DETAIL then 3 See section 2.3 for details. 2) 1./ keys are pressed at a time
when the projector is busy (such as during power-up), the key presses may not take effect.
When the projector is turned on, it begins operation at
Presentation Level.
Presentation level is the normal level of operation at which a source image is (or may be)
displayed. The projector temporarily leaves presentation level when menus are displayed,
control settings are changed, or online help is accessed. The screen display changes to
reflect the operation or function being performed. One or more of the following may be
displayed:
*
Slidebar - to make adjustments to display settings.
* Menu - to select projector functions or change projector settings.
* Dialog Box - to select an action such as confirm or cancel an operation.
* Message Box - to display messages.
* Help Page - to display help and provide assistance.
* Test Pattern - to assist during setup.
(Note: The display of slidebars and messages can be suppressed if desired.
For more information, refer to section 3.7, Utility Features).
Each of the above are explained in the following entries. As you read through
the explanations, note the following:
In most cases ...
EXIT brings you back to presentation level,
RECALL brings you back to the previous page or menu,
ENTER is pressed to make a selection, and
HELP provides context-sensitive help.
3-4