Accurate Technology DigiStop
Page 15 of 16
Frequently Asked Questions
What F/W (Firmware) version do I have?
The readout will display
d 2.xxx
on power up.
This is the firmware version of your readout .
What does
no Enc
no Enc
no Enc
no Enc
mean?
If the encoder cable is unplugged from the readout ,
no Enc
no Enc
no Enc
no Enc
will appear on
the display. To clear: Be sure the encoder is on the scale and plugged into the
readout.
The battery clips seem to be very loose. Is this normal?
Yes. DO NOT
attempt to bend these clips or wedge anything between them
and the case. These clips are designed to expand when the two case halves
are screwed together.
The readings are “backwards”?
You can change reading direction of the Digi-Stop by changing the value of
Programming Parameter Pr 2.
