22
•
Once for time, time/week and date
•
Twice for indoor temperature, dew point
•
Three for rainfall
•
Four for outdoor dew point temperature
•
Five for wind average
•
Six for pressure
•
Seven for sensor dew point
1.
Time, Time/Week and Date.
Press the
C or MIN/MAX/-
button to toggle between time,
time/week and date.
2.
Indoor Temperature.
Press the
C or MIN/MAX/-
button to toggle between temperature and
dew point.
3.
Rainfall.
Press the
C
or
MIN/MAX/-
button to toggle between rate, 24h, week, month and total.
To clear the total rain, press the
C
or
MIN/MAX/-
button until total rain is displayed. The total
rain will flash. Press and hold the
SET
button for five seconds until total rain reads 0.0.
4.
Outdoor Dew Point.
Press the
C
or
MIN/MAX/-
button to toggle between AT
（
Apparent
Temperature) and dew point.
5.
Wind Average.
Press the
C
or
MIN/MAX/-
button to toggle between current,2mins and 10
minutes.
6.
Absolute Pressure and Relative Pressure.
Press the
C
or
MIN/MAX/-
button to toggle
between absolute pressure and relative pressure.
7.
Sensor Heat Index.
Press the
C
or
MIN/MAX/-
button to toggle between sensor heat index and
dew point.
5.2 Set (Program) Mode
While in Normal Mode, press
and hold
the
SET(MODE)
button for at least three seconds to enter the Set
Mode. The first setting will begin flashing. You can press the
SET(MODE)
button again to skip any step, as
outlined below.
Note:
In the Set mode, press the [+] button or [
-
] button to change or scroll the value. Hold the [+] button
or [
-
] button for three seconds to increase/decrease rapidly.
Note:
To exit the Set mode at any time, press the
SNOOZE
button of the display console.
1. Time SYNC (default: ON).
Press the SET button again to set the network time sync. Press the [+] button
or [-] button to switch between SYNC time ON and SYNC time OFF of measure.
2. 12/24 Hour Format (default: 24h)
. Press the
SET(MODE)
button again to adjust the 12/24-hour format
setting (FMT). Press the [+] button or [
-
] button to change between 12 hour and 24-hour format.
3. Change Hour.
press the
SET(MODE)
button again to set the hour. Press the [+] button or [-]
button to
adjust the hour up or down. Note the PM icon is present during afternoon hours.
4. Change Minute.
Press the
SET(MODE)
button again to set the minute. Press the [+] button or [
-
] button
to adjust the minute up or down.
5. Date Format (default: MM-DD): Press
the
SET(MODE)
button again to enter the day/month format
mode. Press the [+] button to switch between MM-DD-YY, DD-MM-YY.
6. Change Month.
Press the
SET(MODE)
button again to set the calendar month. Press the [+] button or [
-
]
button to adjust the calendar month.
7. Change Day.
Press the
SET(MODE)
button again to set the calendar day. Press the [+] button or [
-
]
button to adjust the calendar day.
Содержание DWS7100
Страница 1: ...User Manual ACCUR8 DWS7100 Weather Station...
