ACCUR8 DWS7100, Руководство пользователя

Страница: 12 / 57

11
Figure 8
2. Channel Number: The DWS7100 supports up to eight transmitters. To set each channel number (the
default is Channel 1), change Dip Switches 1, 2 and 3, as referenced in Table 1.
3. Temperature Units of Measure: To change the transmitter display units of measure (°F vs. °C),
change Dip Switch 4, as referenced in Table 1.
DIP SWITCH
FUNCTION
1 2 3 4
DOWN DOWN DOWN --- Channel 1
DOWN DOWN UP --- Channel 2
DOWN UP DOWN --- Channel 3
DOWN UP UP --- Channel 4
UP DOWN DOWN --- Channel 5
UP DOWN UP --- Channel 6
UP UP DOWN --- Channel 7
UP UP UP --- Channel 8
--- --- --- DOWN °F
--- --- --- UP °C
Table 1
4. Insert two AAA batteries.
5. After inserting the batteries, the remote sensor LED indicator will light for 4 seconds, and then flash
once per 60 seconds thereafter. Each time it flashes, the sensor is transmitting data.
6. Verify the correct channel number (CH) and temperature units of measure (°F or °C) are on the
display, as shown in Figure 9.