60
1) Pay attention to the allowable value of electric current.
2) Avoid direct sunlight, humidity, dust, thick oil and salty environment or extreme changes in
temperature.
3) Do not install or store the device in a place where any chemicals or gas are stored.
4) Do not use the device in any unstable, vibrating, or impact-giving area.
5) Connect the earth placed on the backside of this device to terminal plate to prevent any
electric shock from leaking current or a potential difference.
6) Do not put or drop anything on the device and avoid strong impact.
7) Do not disassemble or remodel the device.
8) If this unit has not been used for a long time, use this after confirming with an expert if all
function and appearance are in good condition.
9) Do not splash any fluid on this device or insert any foreign substances.
10) In case of inserting foreign substances or exposing to particular environment, this device
must be examined by an expert before use.
11) Use the power cable, plug, and fuse that are offered by our company.
At this time, confirm the covering of cable, the state of plug connection, and other check points.
• RS 232C cable • USB port • Adapter
12) When pulling out the power cable, turn off the power switch first and then pull the plug out.
13) Storage ambient: Temperature -25 ~ 70 °C, Humidity lower than 93 % (non condensing)
14) Operation ambient: Temperature 5 ~ 40 °C, Humidity 15 ~ 93 % (non condensing)
15) Do not store or use this device under 70 kPa (700 mbar) or over 106 kPa (1060
mbar) of atmospheric pressure.
16) Cleaning & Disinfection
①
Cleaning: Use a soft gauze cloth with volatile liquid like alcohol (Ethyl or Isopropyl alcohol
70~90%) to clean it.
Clean it every 2~3days. Do not use a wet cloth.
②
Disinfection: After measurement, use a soft gauze cloth with volatile liquid like benzene and
alcohol. Then, wipe the enclosure with soft lint. Please wipe after every measurement for
electrode disinfection.
17) Refer to “SAFETY PRECAUTIONS.”
Caution
Users must wipe while wearing safety equipment such as gloves when
disinfecting electrodes.
Our company does not take responsibility for safety accidents caused by
user's carelessness.
STORAGE & MAINTENANCE
Содержание BC720
Страница 1: ......