42
In order to keep one's health and the balance of body composition, check the changes of body
composition through continuous analysis and compare the results. Make sure that the body
composition should are measured under the same physical and environmental conditions. If the
condition before the measurement such as volume of a meal, meal time, and activities
(exercise, sauna, drinking lots of beverage, urination, etc.) are kept same, the reproducibility of
a device is obtained. Therefore, the data can be used to evaluate the change of body
composition.
2. Correct position to measure
1) How to touch electrodes
- Make sure that the plate electrodes are clean.
- Take off the socks or stockings then, stand on the plate electrodes.
- Remove sweat or foreign matters on the soles.
- Fairly place the bare feet on the plate electrodes. Make sure that the clothes are not
between the soles and the plate electrodes.
When ankle electrode is selected to measure body composition, pull down the socks as
show in the picture and make sure the user’s ankle is touched on the electrode.
Caution
When using a ankle electrode, be careful not to trip on the electrode before
and after a measurement.
Use the ankle electrode after reading and understanding the instructions
enough.
Especially the elderly and the infirm have to be more careful of the safety
while using the ankle electrode.
(O) correct stand (X) imbalanced touch (x) foreign matters
(O) correct stand (X) Ankles are barely touched
Содержание BC720
Страница 1: ......
