Prepared By: Peter Brandt Version: 08 – 20080415
Page
22 of 26
40-6640 Service Manual
Fig. 4-2-F
Fig. 4-2-G
Remove plastic screw to provide access
Use 3 mm hexagonal wrench key
If the lines are not perpendicular to each other or a larger adjustment is needed, the housing needs to be removed.
The Main Circuit Board will also need to be detached to provide access to the screws.
Adjust the appropriate screws indicated in figure below.
Screws for horizontal error
Screws for vertical error
Fig. 4-2-H
