Accufast P4, Руководство пользователя и эксплуатационное руководство

Страница: 12 / 30

12
Vacuum Belt Pens 1 and 2
Empty stalls Print Location
mark for pens
1&2
Envelope to be
printed
Input
Roll
Input Roll
lock knob
Scale
1. Once the Feed and Transport components have been set and
locked in place, slide the first, marked piece under the separator
( this might require loosening the separator again,)
2. By hand, introduce the piece under the printer input rolls and
while turning the vacuum rolls by hand, move the piece to the first
imager.
3. Raise the imager by turning the Imager height knob CCW.
4. Roll the piece under the imager and slide the imager on its
mounting bar until the handwritten print location text shows up in
the window under the first pen. Make a note of the imager’s loca-
tion relative to the scale.
5. Roll the piece further on and repeat the process with imager 2
6. With the piece under the imagers, lower each imager until it is
very close to the piece. The piece should just pass under the
imager without resistance
4.3 Lining Up the Print on the Piece
Imager
height
adjust-
ment