Accufast P4, Руководство пользователя и эксплуатационное руководство

Страница: 11 / 30

11
4.2 Set Up the Feeder
1. Turn the printer transport OFF—Lift Printer Cover
2. Loosen the Feeder Piece Separator
3. Loosen the media side guides in the feeder.
4. Mark the first piece to be fed with the general area of desired print lo-
cation.
5. Center the piece and place in against the feeder paper stop under the
separator.
6. Tighten the separator to create drag on the piece.
7. Slide the side guides to the sides of the piece, squaring it up and lo-
cating it accurately in the feed hoper. Do not trap the piece in the
hopper by making the guides too tight.
8. Loosen the Printer input rollers and slide the assembly to catch the
piece from the feeder evenly.
9. Tighten knobs, latches.
10. Place a stack of pieces on top of the first one.
11. As you close the Printer cover, be sure that the speed control is full
slow (CCW).
Piece Separator
Marked piece
Product side guide Vacuum transport belt
Printer input roll
assembly
Printer Cover