Chapter 3, Preparing the devices
3-10
Accu-Chek Smart Pix user's manual
3.7
Accu-Chek Mobile
The Accu-Chek Mobile meter has a built-in infrared port for
data transfer. In order to read data from these devices,
proceed as follows:
•
Place the device no more than 10 cm away from the
infrared window on the Accu-Chek Smart Pix device.
Both infrared windows must be facing one another.
•
Keep the
and
buttons pressed until the meter
turns on
•
Wait for the display check to be completed and the
Transfer data
menu to be displayed.
•
In the
Transfer data
menu, select
For analysis
and press
.
The connection is now established, and the data is
transferred. When data transfer has been completed, the
Transfer finished
display is shown for two seconds. Then, the
meter turns off.
