Chapter 2, Installing the Accu-Chek Smart Pix system
2-14
Accu-Chek Smart Pix user's manual
Completing configuration
When you have made all the settings according to your
requirements and wish to read data from a meter or insulin
pump immediately, please prepare the device accordingly
(see Chapter 3). Then click on the
Read Device
button (starts
search mode).
Please observe the following points concerning search
mode:
•
If you start search mode by clicking on the
Read
Device
button, the search mode is automatically
stopped after a certain time, unless a device is found.
In this case, an appropriate error message appears.
•
If you unplug the Accu-Chek Smart Pix device, then
plug it back in (or, in the meantime, switch off the
computer and switch it back on), the device launches
search mode automatically. In this case, however,
search mode is
not
stopped after a certain time but
continues until a device is found.
If you prefer to familiarise yourself with the preparation
process for devices or other issues first, after having made all
the settings, unplug the Accu-Chek Smart Pix device from the
USB port and plug it back in. This puts the device in
continuous search mode, and you do not have to perform the
following steps within a limited timeframe.
When you unplug the USB cable, the browser window may
close. If it does, simply plug in the Accu-Chek Smart Pix
device again and open the
START.HTM
file again with a
double click.
