manualshive.com logo in svg

Accu-Chek GO, Инструкция по эксплуатации

Поделиться
Скачать
Accu-Chek GO Скачать руководство пользователя страница 122

122

Acoustic Mode

Farbe: P 021 – Prüfmittelnummer: 201

7.4  Announcement of results saved in memory

Only the last result that was saved can be announced acoustically. It is 
represented in the same way as any result that is announced directly 
following a test.

Notes

i

  If the memory does not contain any results or the last result that 

was saved has been erased or lost, three horizontal bars 

---

 are 

displayed. This is signalled acoustically as two short beeps 
sounded three times in succession ( - -  - -  - - ). 

i

  If the battery symbol  , the thermometer symbol   or the 

exp

 

symbol is displayed together with the most recent result, the 
meter emits additional beep tones (see Chapter 7.5 
“Announcement of symbols and error messages”).

i

  If the result that was most recently saved is flagged by the bottle 

symbol as being a performance check result (see Chapter 8 
“Checking your meter”), it is announced in the same way as any 
blood glucose test result. There is no acoustic signal to identify it 
as a performance check result. Likewise, there is no acoustic sig-
nal to identify results flagged by an asterisk as being a special 
result (see Chapter 5.6 “Flagging special results”). 

Содержание GO

















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды