manualshive.com logo in svg

Accu-Chek GO, Инструкция по эксплуатации

Поделиться
Скачать
Accu-Chek GO Скачать руководство пользователя страница 100

100

Using the meter as a notebook

Farbe: P 021 – Prüfmittelnummer: 201

i

  You can move directly from reviewing results in memory to blood 

glucose testing by inserting a test strip in the test strip guide. The 
meter behaves as if it had been turned on with a test strip (see 
Chapter 5.2.1 “Turning the meter on with a test strip”).

6.3  Requesting 7, 14 and 30 day averages

The meter can display the average of results from the last 7, 14 or 30 
days. The calculation is based on all results falling within the chosen 
period. The current day is always included in the calculation. If more 
than 300 test results were saved during this period, the calculation will 
be based on the last 300. 

P

  With the meter turned off, press the 

<

 or 

>

 button.

Содержание GO

















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды