Accton Technology VS4512DC Скачать руководство пользователя страница 68

Страница: 68 / 334

Configuring the Switch

3-38

CLI

– This example sets the authentication mode to enable 802.1x on port 2, and

allows up to ten clients to connect to this port.

Displaying 802.1x Statistics

This switch can display statistics for dot1x protocol exchanges for any port.

Statistical Values

Web

– Select Security, 802.1x, Statistics. Select the required port and then click

Query. Click Refresh to update the statistics.

Console(config)#interface ethernet 1/2

4-84

Console(config-if)#dot1x port-control auto

4-70

Console(config-if)#dot1x operation-mode multi-host max-count 10

4-70

Console(config-if)#

Parameter

Description

Rx EXPOL Start

The number of EAPOL Start frames that have been received by this

Authenticator.

Rx EAPOL Logoff

The number of EAPOL Logoff frames that have been received by this

Authenticator.

Rx EAPOL Invalid

The number of EAPOL frames that have been received by this

Authenticator in which the frame type is not recognized.

Rx EAPOL Total

The number of valid EAPOL frames of any type that have been received

by this Authenticator.

Rx EAP Resp/Id

The number of EAP Resp/Id frames that have been received by this

Authenticator.

Rx EAP Resp/Oth

The number of valid EAP Response frames (other than Resp/Id frames)

that have been received by this Authenticator.

Rx EAP LenError

The number of EAPOL frames that have been received by this

Authenticator in which the Packet Body Length field is invalid.

Rx Last EAPOLVer

The protocol version number carried in the most recently received EAPOL

frame.

Rx Last EAPOLSrc

The source MAC address carried in the most recently received EAPOL

frame.

Tx EAPOL Total

The number of EAPOL frames of any type that have been transmitted by

this Authenticator.

Tx EAP Req/Id

The number of EAP Req/Id frames that have been transmitted by this

Authenticator.

Tx EAP Req/Oth

The number of EAP Request frames (other than Rq/Id frames) that have

been transmitted by this Authenticator.

Содержание VS4512DC















































































































































































































































































































































Результаты поиска

Содержание VS4512DC

Отзывы:

Accton Technology VS4512DC, Руководство по управлению, Страница: 68 / 334

Результаты поиска

Содержание VS4512DC

Отзывы: