Accton Technology VS4512DC Скачать руководство пользователя страница 284

Страница: 284 / 334

Command Line Interface

4-138

Example

Related Commands

show vlan (4-143)

vlan

This command configures a VLAN. Use the

form to restore the default settings or

delete a VLAN.

Syntax

vlan

vlan-id

[

name

vlan-name

]

media ethernet

[

state

{

active

suspend

}]

no vlan

vlan-id

[

name

state

]

•

vlan-id

- ID of configured VLAN. (Range: 1-4093, no leading zeroes)

•

name

- Keyword to be followed by the VLAN name.

vlan-name

- ASCII string from 1 to 32 characters.

•

media ethernet

- Ethernet media type.

•

state

- Keyword to be followed by the VLAN state.

active

- VLAN is operational.

suspend

- VLAN is suspended. Suspended VLANs do not pass packets.

Default Setting

By default only VLAN 1 exists and is active.

Command Mode

VLAN Database Configuration

Command Usage

•

no vlan

vlan-id

deletes the VLAN.

•

no vlan

vlan-id

name

removes the VLAN name.

•

no vlan

vlan-id

state

returns the VLAN to the default state (i.e., active).

• You can configure up to 255 VLANs on the switch.

Example

The following example adds a VLAN, using VLAN ID 105 and name RD5. The VLAN
is activated by default.

Related Commands

show vlan (4-143)

Console(config)#vlan database
Console(config-vlan)#

Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Console(config-vlan)#

Содержание VS4512DC















































































































































































































































































































































Результаты поиска

Содержание VS4512DC

Отзывы:

Accton Technology VS4512DC, Руководство по управлению, Страница: 284 / 334

Результаты поиска

Содержание VS4512DC

Отзывы: