Accton Technology VS4512DC Скачать руководство пользователя страница 224

Страница: 224 / 334

Command Line Interface

4-78

Example

Related Commands

snmp-server contact (4-77)

snmp-server host

This command specifies the recipient of a Simple Network Management Protocol
notification operation. Use the

form to remove the specified host.

Syntax

snmp-server host

host-addr

community-string

[

version

{

}]

no snmp-server host

host-addr

•

host-addr

- Internet address of the host (the targeted recipient).

(Maximum host addresses: 5 trap destination IP address entries)

•

community-string

- Password-like community string sent with the

notification operation. Although you can set this string using the

snmp-server host

command by itself, we recommend that you define this

string using the

snmp-server community

command prior to using the

snmp-server host

command. (Maximum length: 32 characters)

•

version

- Specifies whether to send notifications as SNMP v1 or v2c traps.

Default Setting

Host Address: None
SNMP Version: 1

Command Mode

Global Configuration

Command Usage

• If you do not enter an

snmp-server host

command, no notifications are sent.

In order to configure the switch to send SNMP notifications, you must enter at
least one

snmp-server host

command. In order to enable multiple hosts, you

must issue a separate

snmp-server host

command for each host.

• The

snmp-server host

command is used in conjunction with the

snmp-server

enable traps

command. Use the

snmp-server enable traps

command to

specify which SNMP notifications are sent globally. For a host to receive
notifications, at least one

snmp-server enable traps

command and the

snmp-server host

command for that host must be enabled.

• Some notification types cannot be controlled with the

snmp-server enable

traps

command. For example, some notification types are always enabled.

• The switch can send SNMP version 1 or version 2c notifications to a host IP

address, depending on the SNMP version that the management station
supports. If the snmp-server host command does not specify the SNMP version,
the default is to send SNMP version 1 notifications.

Console(config)#snmp-server location WC-19
Console(config)#

Содержание VS4512DC















































































































































































































































































































































Результаты поиска

Содержание VS4512DC

Отзывы:

Accton Technology VS4512DC, Руководство по управлению, Страница: 224 / 334

Результаты поиска

Содержание VS4512DC

Отзывы: