Accton Technology VS4512DC Скачать руководство пользователя страница 280

Страница: 280 / 334

Command Line Interface

4-134

Example

Related Commands

spanning-tree edge-port (4-132)

spanning-tree link-type

This command configures the link type for Rapid Spanning Tree. Use the

form to

restore the default.

Syntax

spanning-tree link-type

{

auto

point-to-point

shared

}

no spanning-tree link-type

•

auto

- Automatically derived from the duplex mode setting.

•

point-to-point

- Point-to-point link.

•

shared

- Shared medium.

Default Setting

auto

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

• Specify a point-to-point link if the interface can only be connected to exactly one

other bridge, or a shared link if it can be connected to two or more bridges.

• When automatic detection is selected, the switch derives the link type from the

duplex mode. A full-duplex interface is considered a point-to-point link, while a
half-duplex interface is assumed to be on a shared link.

• RSTP only works on point-to-point links between two bridges. If you designate

a port as a shared link, RSTP is forbidden.

Example

Console(config)#interface ethernet 1/5
Console(config-if)#bridge-group 1 portfast
Console(config-if)#

Console(config)#interface ethernet ethernet 1/5
Console(config-if)#spanning-tree link-type point-to-point

Содержание VS4512DC















































































































































































































































































































































Результаты поиска

Содержание VS4512DC

Отзывы:

Accton Technology VS4512DC, Руководство по управлению, Страница: 280 / 334

Результаты поиска

Содержание VS4512DC

Отзывы: