Accton Technology VS4512DC Скачать руководство пользователя страница 172

Страница: 172 / 334

Command Line Interface

4-26

IP Filter Commands

management

This command specifies the client IP addresses that are allowed management
access to the switch through various protocols. Use the

form to restore the

default setting.

Syntax

[

]

management

{

all-client

http-client

snmp-client

telnet-client

}

start-address

[

end-address

]

•

all-client

- Adds IP address(es) to the SNMP, Web and Telnet groups.

• http-client

Adds IP address(es) to the Web group.

• snmp-client

Adds IP address(es) to the SNMP group.

•

telnet-client

- Adds IP address(es) to the Telnet group.

• start-address - A single IP address, or the starting address of a range.
• end-address - The end address of a range.

Default Setting

All addresses

Command Mode

Global Configuration

Command Usage

• If anyone tries to access a management interface on the switch from an invalid

address, the switch will reject the connection, enter an event message in the
system log, and send a trap message to the trap manager.

• IP address can be configured for SNMP, Web and Telnet access respectively.

Each of these groups can include up to five different sets of addresses, either
individual addresses or address ranges.

• When entering addresses for the same group (i.e., SNMP, Web or Telnet), the

switch will not accept overlapping address ranges. When entering addresses for
different groups, the switch will accept overlapping address ranges.

• You cannot delete an individual address from a specified range. You must

delete the entire range, and reenter the addresses.

• You can delete an address range just by specifying the start address, or by

specifying both the start address and end address.

Command

Function

Mode

Pag

management

Configures IP addresses that are allowed management access GC

4-26

show management

Displays the switch to be monitored or configured from a

browser

4-27

Содержание VS4512DC















































































































































































































































































































































Результаты поиска

Содержание VS4512DC

Отзывы:

Accton Technology VS4512DC, Руководство по управлению, Страница: 172 / 334

Результаты поиска

Содержание VS4512DC

Отзывы: