Accorroni GREEN 220, Руководство по установке

Страница: 13 / 40

CALIDO1
DHW heat pump with tank
13
POS. DESCRIPTIONS
DIMENSIONS
GREEN 220 SERIES
3 Hole for power supply φ 17 mm
4 Condensate drain φ 22 mm x 0,3 m
5 Hot water outlet G 1” female
6 1” ¼ female
7
Upper tank temperature (T3) + thermostat
T85°C
φ 12 mm x L 120 mm
8 G ½” female
9
1200 W auxiliary electric heater with integrat -
ed thermostat
1” ¼ female
10 Grounding M6
11 Lower tank temperature (T2) φ 12 mm x L 90 mm
12 Cold water inlet G 1” female
13 Solar water outlet G 1” female
14 Auxiliary tank temperature /
15 Solar water inlet G 1” female
16 Solar exchanger coil 1,2 m2
17 Auxiliary heat source outlet G 1” female
18 Auxiliary heat source inlet G 1” female
19 Auxiliary heat source coil 0,5 m2
8.3 CABLE GLANDS
8.4 HOW TO REPLACE THE MAGNESIUM ANODE
order to protect it, and the other components. It can help to extend the life-span of the tank.
Check the magnesium anode every 6 months and change it if it has the diameter less than 22 mm, clean it if it is intact but
encrusted by limestone.
• Turn the power of the unit 'OFF' and pull out the plug.
• Drain all the water out of the tank.
• Remove the old magnesium anode from the tank.
• Replace it with the new magnesium anode.
• Recharge the water.