CALIDO1
DHW heat pump with tank
25
•
During operation mode, press the buttons and to adjust the setting temperature directly.
•
By pressing these buttons when the unit is on clock setting status, the hour(s) and the minute(s) of the clock time can be adjusted.
•
By pressing these buttons when the unit is on timer setting status, the hour(s) and the minute(s) of the timer ‘ON’/’OFF’ can be adjusted.
•
Check and adjust the set parameters:
1) When the unit is 'ON' or 'OFF' (not on clock and timer setting status), briefly press the button to access the user parameter control.
Select the parameter by pressing or . Press to exit.
2) When the unit is 'OFF' (not on clock and timer setting status), press
and buttons at the same time for 2” and insert the password
confirming each field with button to enter in the adjustment of installer parameters. Select the parameter and press the
or
buttons and briefly press the button to access to the parameter value. Press the or buttons to adjust the value and confirm with
button. Press to exit.
For example: parameter 01, the relative value is 5°C:
Once the parameters have been set by the installer, the user cannot change them. Please contact a qualified after-sales
service person to change the installer parameter settings.
•
By pressing and buttons at the same time for 5 seconds, all the buttons are locked.
•
By pressing at the same time and for 5 seconds again the and buttons, all the buttons are unlocked.
4. Buttons
and
Clock setting:
•
Press button to entry the clock setting interface: hour icon “
88
:88” flashes;
•
Press the and buttons to set the hour and press to confirm: minute icon “
88
:88” flashes;
•
Press the and buttons to set the minutes and press to confirm and exit.
The set time is shown on the display.
Timer setting:
•
Press the button for 5” to enter the timer setting interface: timer ‘ON’ hour icon “
88
:88” flashes;
•
Press the and buttons to adjust the time and press to confirm: timer ‘ON’ minute icon “88:
88
” flashes;
•
Press the
and buttons to adjust the minutes and press to confirm: timer ‘OFF’ hour icon “
88
:88” flashes;
•
Press the and buttons to adjust the hour and press to confirm: timer ‘OFF’ hour icon “88:
88
” flashes;
•
Press the and buttons to adjust the minutes and press to confirm.
Timer ‘ON’ and ‘OFF’ icons are shown on the display next to the current time.
Press button to clear the timer settings when programming the timer 'ON' and timer 'OFF' time, thus returning to the current time display.
Timer settings repeat cyclically and are still valid even after a power failure.
5. Button
Press this button to turn ‘ON’ or turn ‘OFF’ the. The auxiliary resistor will operate according to its own control logic.
When the unit is ‘ON’, press this button for 5” to enable or disable the fan ventilation function.
6.
Error codes
During standby or running status, if there is a malfunction, the unit will stop automatically and show the error code on the right screen of the
controller.
Содержание GREEN 220
Страница 36: ...CALIDO1 DHW heat pump with tank 36 17 2 CONNECTION OF AN AUXILIARY POWER SOURCE...
Страница 39: ......