background image

 

 

15 

12.

 

Battery operation and charging 

 

The Configura Advance electric version has a 
rechargeable battery fitted to power the electric 
functions.   
When a handset button is pressed, the relevant 
function will operate. 
If a warning beep sounds when any handset button is 
pressed, the battery may be low on charge and must 
be recharged as soon as possible.  
Please see Section 16 Troubleshooting if the chair does 
not operate as expected. 
 

 

 
The charging lead is in two sections.  The short section 
plugs into the control box, and the long section plugs 
into a mains socket. 
The two sections are connected by an inline plug and 
socket. To charge the Configura Advance: 
 
1.

 

Ensure the round connector is plugged into the 
control box on the back of the chair. 

2.

 

Ensure the two sections of the charging lead are 
connected securely. 

3.

 

Plug the mains plug into a mains socket. 

 

Ensure that the charging lead does not create a trip 
hazard, and do not move the chair while the battery is 
being charged. 
If the chair is moved inadvertently and the charging 
lead is stretched, the two sections may come apart 
from each other.  Move the chair nearer to the mains 
socket and reconnect the two sections of the charging 
lead. 
We recommend that the battery is charged weekly.  If 
the chair functions are used a lot, then it should be 
charged daily. 
When charging is complete, disconnect the long 
charging lead at the inline connector and store the 
lead away from the chair. 
 
The battery box and control box are on the rear of the 
backrest.  There are two warning lights as shown in 
Figure 32. 
 
 

Control Box Warning Light 

See Figure 32 Item 1. 
This warning light will show the following: 
Solid green: 

Chair plugged into mains electricity. 

No light:  

Normal operation. 

Solid orange: 

Handset button pressed. 

 

Battery Box Warning Light 

See Figure 32 Item 2. 
This warning light will show the following: 
Solid yellow: 

Battery charging 

No light:  

Normal operation 

Flashing yellow:  Error while charging 
 
If there is an error while charging, check that all 
charging lead connections are secure.  Contact 
Accora if problem persists. 

 

 
 

Battery Storage 

Follow the directions in Section 4 for storage conditions.  
The battery must be recharged at least every 12 
months when in storage. 
 

 

 

Figure 31 

 

Figure 32 

Содержание Configura Advance Chair

























Отзывы: