Acclaim Lighting Unity SNS2019, Руководство пользователя

Страница: 44 / 56

42
TESTING EMITTER OUTPUT VIA RDM
After you have addressed each Unity fixture we recommend that you also test each one.
This can be achieved either using the
System Test
option within the internal menu (see
page 35) or using your RDM (Remote Device Management) tool. Various third party DMX/
RDM tools are available; Acclaim Lighting recommends the XMT-350 for this task.
TO TEST EMITTER OUTPUT USING THE XMT-350
1 Connect the XMT-350 to the DMX input line of the Unity installation.
2 Power on the fixture(s) and the XMT-350.
3 On the XMT-350, press the
MODE button, then use the arrow buttons to highlight the
SEND function and press the button to select.
SEND DMX
ADDRESS LEVEL
%
001 000
4 Use the arrow buttons to determine the DMX output:
•
Use the left and right buttons to choose the DMX address,
•
Use the up and down buttons to increase/decrease the level at the chosen address.
Note: If you wish to send DMX values to all addresses simultaneously (rather than cycling
through them individually), when the XMT-350 is showing address 001, press the left button
once to change to
ALL CHANNELS . Now when you set the level it will affect all emitters equally.