Acclaim Lighting Unity SNS2019, Руководство пользователя

Страница: 28 / 56

26
CONFIGURATION
REMOVING THE DISPLAY COVER
The user display and control buttons are
protected behind a removable cover on the
rear panel of the Unity fixture.
TO REMOVE THE DISPLAY COVER
•
Use a 1/8” (3mm) Allen (hex) wrench
to remove the two bolts holding the
display cover.
User
display
Control
buttons
ENTERING THE MENU
Press and hold the MENU button for roughly 7
seconds until the Main Menu entry is shown, then
use the buttons to navigate the menu, as described
below. The menu will automatically exit roughly six
seconds after the last button press.
For a certain period after the menu has first been
entered, and then exited, you will only need to tap
any button to re-enter. After that period a locked
symbol
will be shown and you will need to
once again press and hold the MENU button for
roughly 7 seconds to unlock it.
SEE ALSO
•
“Menu navigation” on page 27
•
“Main menu items” on page 28
Operation of the fixture commences as
soon as power is applied and the user
display on the rear panel will first show
ACCLAIM UNITY
. The display will then show
the DMX address* of the fixture and the
selected channel mode (5CH or 7CH - see page
30 for details), before blanking out. The fixture
may or may not immediately show output from its
emitters - this will depend upon the settings within the
menu and/or control input.
Note: The sealed control buttons use capacitive sensors
similar to your smartphone screen and will not respond to
touch if you are wearing gloves.
* Note: If either the Black
Out or Internal Color states
are active, the display
will list them instead of
showing the DMX address.