Acclaim Lighting Unity SNS2019, Руководство пользователя

Страница: 38 / 56

36
CONFIGURING ARIA WIRELESS DMX
Each Unity fixture includes an internal Aria™ wireless DMX receiver
unit to allow it to be remotely controlled by an Acclaim Lighting
Aria transmitter. Fifteen radio channels are available to choose
from, allowing you to avoid potential interference sources, such
as WiFi access points, and set up parallel wireless links between
different sets of Aria units. Unity fixtures are shipped with the wireless system disabled and
the radio channel set to 0 as standard. For more details about choosing the most suitable
radio channel, see page 45.
Notes:
•
The Aria wireless radio channel setting can also be configured via RDM, see page 39.
•
Although Aria wireless settings can be configured via RDM over a wired DMX link, the Aria
wireless link itself does not support RDM (which requires 2-way communication).
•
The Aria wireless radio channel setting is completely independent of the DMX address.
•
If a valid wired DMX control input is applied to the fixture, it will take precedence over the Aria
wireless control link.
TO CONFIGURE ARIA WIRELESS DMX
1 Enter the user menu (see page 26).
2 Use the or buttons to locate the
Aria Wireless DMX
option and press ENTER . The
display will show
Wireless On/Off
.
3 Press ENTER . If the display shows
Off
, use the or buttons to change the entry to
On
and press ENTER .
4 Use the or buttons to show
Wireless Channel
and press ENTER .
5 Use the or buttons to choose the required radio channel (from 0 to 14 - to match
that used by the Aria transmitter) and press ENTER .
Note: Ensure the Aria transmitter and any other related fixtures are set to use the same wireless
radio channel.