Acclaim Lighting Dyna Graze HO Exterior DMX, Руководство пользователя

Страница: 9 / 20

7
www.acclaimlighting.com
Fitting an optional louver
Optional louvers are available to eliminate side spill in all directions.
To fit an optional louver
1 Carefully slide the louver into the two channels located on either side of the emitter
housing.
Note: You may find that the louver is tight and difficult to slide in, particularly on the 4’ models.
If so, smear a small quantity of petroleum jelly onto the angled lips of the louver to help it slide.
2 When the louver is fully in place, on the underside of the fixture, insert one of the supplied
small locking screws at either end (on opposite sides) and tighten them to keep the
louver firmly in place.
Louver
Locking screw
(M3 x 5mm)