Acclaim Lighting Dyna Graze HO Exterior DMX, Руководство пользователя

Страница: 14 / 20

12
www.acclaimlighting.com
DMX personality mode selection
Dyna Graze HO Exterior DMX 4’ models have two modes of operation:
•
Extended (EXD) mode - The four emitter sections are addressed individually, or
•
Standard (STD) mode - All four emitter sections are addressed collectively.
Note: Dyna Graze HO Exterior DMX 1’ models always operate in standard (STD) mode.
For a summary of how channels are allocated in both modes for all the model variants, see
page 10.
Using an RDM (Remote Device Management) tool, you can quickly change between the
two operation modes. Various third party DMX/RDM tools are available; Acclaim Lighting
particularly recommend the Swisson XMT-350 for this task.
To change personality modes using the Swisson XMT-350
1 Connect the XMT-350 to the DMX input line of either a single fixture or multiple fixtures in
a pre-arranged daisy chain configuration.
2 Power on the fixture(s) and the XMT-350.
3 On the XMT-350, press the
MODE button, then use the arrow buttons to highlight the
RDM
function and press the button to select. The XMT-350 will search for RDM devices and
after a short while the XMT-350 will display a list of all located fixtures:
The fixture that is highlighted within the list should begin flashing its emitters to identify
itself.
4 If necessary, use the up/down buttons to highlight an alternative fixture.
5 On the XMT-350, press the button to view details for the chosen fixture and then use
the down button to highlight the
DMX PERSONALITY
entry:
6 Press the button to view the personality options:
7 Use the up/down buttons to highlight the required personality and then press the
button to store it within the fixture.
8 Press the button to return to the previous screen.