Acclaim Lighting Dyna Graze HO Exterior DMX, Руководство пользователя

Страница: 8 / 20

6
www.acclaimlighting.com
Fitting the glare shield
Each Dyna Graze fixture is supplied with a glare shield which can be fitted on either side of
the emitter housing to help conceal the emitters from side view.
To insert the glare shield
1 Carefully slide the glare shield into either of the two channels located on either side of the
emitter housing.
Note: You may find that the glare shield is tight and difficult to slide in, particularly on the 4’
models. If so, smear a small quantity of petroleum jelly onto the angled base of the glare shield
to help it slide.
2 When the shield is fully in place, on the underside of the fixture, insert one of the supplied
small locking screws at either end and tighten them to keep the shield firmly in place.
Glare shield
Locking screw
(M3 x 5mm)