Acclaim Lighting Dyna Accent, Руководство пользователя

Страница: 14 / 24

12
www.acclaimlighting.com
OPERATION
Dyna Accent fixtures have no external controls and instead rely on RDM (Remote Device
Management) for all configuration via the DMX interface. This allows multiple devices to be
configured either before or after installation.
The main items that can be configured on each fixture (via RDM) are:
•
DMX address (see page 13)
•
Aria™ wireless receiver
(see page 14)
•
Automation features (see page 15)
Various third party DMX/RDM tools are available; we recommend the Acclaim Lighting XMT-
350 for this task.
MAKING A TEMPORARY CONTROL LINK WITH THE XMT-350
Each Acclaim lighting XMT-350 DMX/RDM tool is supplied with a 5-pin male XLR lead that
can be used to make a temporary control input link with the Dyna Accent feed-in cable. Use
a 3-pin terminal block, wire nuts, conn blocks or Wago® connectors to temporarily join the
two cables:
Gray Gray
Red Red
Black Black
DMX + (Hot)
DMX – (Cold)
Ground
Dyna Accent
feed-in
cable
Male XLR
lead from
XMT-350
Power in