Acclaim Lighting Dyna Accent, Руководство пользователя

Страница: 16 / 24

14
www.acclaimlighting.com
CONFIGURING THE ARIA WIRELESS DMX RECEIVER
Each Dyna Accent fixture includes an internal Aria™ wireless DMX
receiver unit to allow it to be remotely controlled by an Acclaim
Lighting Aria transmitter. Fifteen radio addresses (channels)
are available to choose from, allowing you to avoid potential
interference sources, such as WiFi access points, and set up parallel
wireless links between different sets of Aria units. Dyna Accent
fixtures are shipped with the wireless system enabled (this does not prevent direct control
via the cable) and the radio channel set to 0 as standard. For more details about choosing
the most suitable radio channel, see page 18.
Using an RDM (Remote Device Management) tool, you can quickly change between the
various DMX personality modes. Various third party DMX/RDM tools are available; we
recommend the Acclaim Lighting XMT-350 for this task.
TO CONFIGURE WIRELESS DMX USING THE ACCLAIM LIGHTING XMT-350
1 Connect the XMT-350 to the DMX input line of either a single fixture or multiple fixtures in
a pre-arranged daisy chain configuration.
2 Power on the fixture(s) and the XMT-350.
3 On the XMT-350, press the
MODE button, then use the arrow buttons to highlight the
RDM function and press the button to select. The XMT-350 will search for RDM devices
and after a short while the XMT-350 will display a list of all located fixtures. The fixture that
is highlighted within the list should begin flashing its emitters to identify itself.
4 If necessary, use the up/down buttons to highlight an alternative fixture.
5 Press the button to view details for the chosen fixture and then use the down button
to highlight the MODEL entry:
6 Press the button to view the options:
Within this menu, you can change the radio channel and also enable/disable the wireless
receiver circuit.
7 To change the radio address: Use the up/down buttons to highlight the WIRELESS ADDR
option and press the button. Use the up/down buttons to select the required channel
(between 0 and 14) and press the button. For more details about choosing the most
suitable radio channel, see page 18.
8 Press the button to return to the previous screen.
DYNA ACCENT
MODEL: DYNA ACCENT
MAN:
DMX START ADDRESS:
DMX SLOTS:
ACCLAIM LIGHTING
001
4
LABEL: DYNA ACCENT
DMX PERSONALITY: MODE1: 4CH-
DYNA ACCENT
0
ON
70
10
WIRELESS ON/OFF ON
WIRELESS ADDR
PHOTO SENS. ON/OFF
PHOTO SENS. VALUE
LED ON TIME ON LIGHT