Acclaim Lighting Dyna Accent, Руководство пользователя

Страница: 17 / 24

15
www.acclaimlighting.com
USING THE AUTOMATION FEATURES
The fixture includes two related features that allow you to automate the standalone
operation of the fixture:
•
The in-built photocell can enable fixture output (at 100%) when the ambient light level
falls below a pre-determined level.
•
The auto shutoff timer determines how long the fixture should remain outputting after it
has been triggered by the photocell.
These automated features operate only in standalone mode, i.e. with no external DMX
control input.
TO SET THE AUTOMATION FEATURES USING THE ACCLAIM LIGHTING XMT-350
1 Connect the XMT-350 to the DMX input line to the single fixture.
2 Power on the fixture(s) and the XMT-350.
3 On the XMT-350, press the
MODE
button, then use the arrow buttons to highlight the
RDM function and press the button to select. The XMT-350 will search for RDM devices
and after a short while the XMT-350 will display the located fixture. The fixture that is
highlighted within the list should begin flashing its emitters to identify itself.
4 Press the button to view details for the chosen fixture and then use the down button
to highlight the MODEL entry:
5 Press the button to view the options:
DYNA ACCENT
MODEL: DYNA ACCENT
MAN:
DMX START ADDRESS:
DMX SLOTS:
ACCLAIM LIGHTING
001
4
LABEL: DYNA ACCENT
DMX PERSONALITY: MODE1: 4CH-
DYNA ACCENT
0
ON
70
10
WIRELESS ON/OFF ON
WIRELESS ADDR
PHOTO SENS. ON/OFF
PHOTO SENS. VALUE
LED ON TIME ON LIGHT
6 Use the lower three options to set your parameters:
•
PHOTO SENS. ON/OFF - enables/disables the photocell system.
•
PHOTO SENS. VALUE - determines the required ambient light level at which the fixture
should begin outputting (
100
is the most sensitive to light). Some experimentation will
be required to determine the optimum setting.
•
LED ON TIME ON LIGHT - determines the number of hours (starting from the photocell
trigger) that light output should continue before being extinguished. The options
range from
0
to
10
hours.
7 Press the button to return to the previous screen.
Notes: For the photocell feature to operate, ensure that no DMX signal is received by the fixture.
RGBW models will output all four colors at 100% when triggered.