Acclaim Lighting Canvas, Руководство пользователя

Страница: 25 / 32

23
www.acclaimlighting.com
SETTINGS
1/2
Auto
Universe Channel
Zero To Ten 1
Done
1 1
SETTINGS
1/2
Manual
2.3 V
Zero To Ten 1
Done
2 3
PRESETS DIMMERS TIMERS SETTINGS
5/6
Assign
Assign
Voltage Out
(0 - 10 Volts)
Contact
Triggers
OFF
VOLTAGE OUT
In addition to originating two DMX digital universes, the Canvas controller also outputs two
0-10V analog lines (see page 3), each of which can be associated with the status of a
particular universe and channel, or alternatively can be given a fixed output level.
TO SET 0-10V OUTPUTS
1 Display page 5 of the settings
menu (see page 16).
2 Tap the Voltage Out Assign
button to display a Zero To Ten
setup page.
3 If necessary, tap the or
buttons to change between
the two outputs:
1 or 2 - the
pages are aligned to the
physical 0-10V outputs 1 and
2, respectively.
There are two operation
modes for each of the two
channels -
Manual or Auto :
•
Manual - Allows you to
send a specific fixed voltage
onto the chosen output.
Use the two sets of left/
right arrows to select
the integer and fraction
components of the total
voltage output.
If necessary, tap the
Manual
or
Auto
button to change
between operation modes.
•
Auto - Allows you to
associate each 0-10V output
with a particular channel
on a specific universe. Once
the association is made,
the dimming status of the
chosen channel will be sent
as an equivalent voltage on
the output line.
4 When the channels are configured as required, tap the Done button to save and exit.