Acclaim Lighting AL Driver series, Руководство пользователя

Страница: 24 / 44

22
www.acclaimlighting.com
CHOOSING A BASE ADDRESS (DMX AND DALI)
When DMX or DALI modes are chosen, you need to set a base address at which the AL
Driver should begin applying its various output channels.
•
DMX addresses run from 1 to 512
•
DALI addresses run from 0 to 63
In either case you need to ensure that there is sufficient ‘head room’ from the chosen base
address to the final address that will be required, as determined by the LOAD and CHANNEL
settings (see pages 19 to 21).
Note: The control mode and the DMX address for the AL Driver can optionally be configured
remotely using the RDM (Remote Device Management) protocol via a DMX connection.
TO CHOOSE A BASE ADDRESS
1 Choose either the DMX512 or DALI menu options, as required. See page 18 for details.
2 Use the DOWN button to show the
ADDRESS
option and press the OK button to enter.
3 Use the UP and DOWN buttons to display the required base address and press the OK
button to select it.
Pages 26 to 34 show you exactly how the channels of each port are distributed across
the DMX or DALI addresses for each LOAD and CHANNEL combination.
CHOOSING THE LOAD TYPE (MANUAL AND AUTO MODES)
The Manual and Auto modes both allow you determine the port outputs directly from the
control panel without need for external inputs. The options available to you will depend on
the nature of the emitters that are connected and declared using the LOAD option (e.g. RGB,
RGBW, Ai Dim, etc.).
TO CHOOSE THE LOAD TYPE
1 Choose either the MANUAL or AUTO menu options, as required. See page 18 for details.
2 Use the DOWN button to show the
LOAD
option and press the OK button to enter.
3 Use the UP and DOWN buttons to change between the various
LOAD
types:
RGB
,
RGBW
,
Ai Dim, WHITE
or
DW
. Press the OK button to select the one that matches your
connected fixture type.