manualshive.com logo in svg

Acclaim Lighting AL Driver series, Руководство пользователя

Поделиться
Скачать
Acclaim Lighting AL Driver series Скачать руководство пользователя страница 19

17

www.acclaimlighting.com

Determines the control method to be used. Other options are: DMX512, 

DALI, 1-10V, 0-10V and MANUAL. See page 18.

Selects the nature of the LED loads that will be placed on the output ports: 

Options are RGB, RGBW, Ai Dim, WHITE and DW. See page 22.

Determines the pre-programmed chase pattern, from 01 to 10. An AUTO 

option is also available to automatically change between the ten pattern 

options. See page 23.   

Determines the speed of the chase. See page 23.

Determines the crossfade time between the steps of each chase pattern. 

See page 23.

Displays the current internal firmware version.

Displays the maximum internal temperature that the unit has encountered 

during operation (in degrees Centigrade).

Displays the minimum internal temperature that the unit has encountered 

during operation (in degrees Centigrade).

Displays the current internal temperature of the driver (in degrees 

Centigrade).

MAIN MENU ITEMS (WHEN MODE SET TO AUTO) 

MODE

AUTO

LOAD

RGBW

PATTERN

01

FADETIME

001

VERSION

1.02

SPEED

001

If the OK button is pressed, the logged maximum and minimum 

temperature levels are cleared.

Содержание AL Driver series













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды