Acclaim Lighting AL Driver series, Руководство пользователя

Страница: 7 / 44

5
www.acclaimlighting.com
V+
Re
d
(W
1)
Gr
een
(W
2)
Blu
e
(W
3)
Wh
ite
(W
4)
OUTPUT PORT CONNECTIONS
AL Drivers have multiple constant voltage
output ports, each of which uses 6-pin
terminal block. The output ports use a
common anode supply and there are two
V+ contacts to assist with multiple fixture
connections (the two contacts are joined
internally so either or both can be used, as
required).
Each port can support a maximum of
6.6A
.
However, the maximum overall load across all
ports must not exceed the following:
•
AL Driver 200
8A
•
AL Driver 400
16.5A
•
AL Driver 800
33A
Insert the terminal block
into the required output
socket and ensure that it
fully clicks into place.
Fu
se
25
0V
/8A
V
+
V
+
R
e
d
-
G
re
e
n
-
B
lu
e
-
W
h
it
e
-
1
OUTPUT PORT CONTROL
The manner in which the various ports are grouped and operate is determined primarily by
three important menu settings:
• MODE
- determines the control method: DMX, DALI, 0-10V, etc. (page 18)
•
CHANNEL
- determines how the ports are assigned to the control method (pages 19 to 21)
• LOAD
- determines the functions of each contact on every port (pages 19 to 21):
Notes:
•
Whichever LOAD-type is chosen,
that setting will be applied
globally to all ports. For example,
it is not possible to choose Ai
Dim operation for some ports
and RGBW for others.
•
The maximum
6.6A
load limit
for each port (and the maximum
overall load for the whole device)
must not be exceeded.
•
In Ai Dim mode, the W1 to W4
connections align with the four
marked wires of products such
as Ai Flex.
V
+
V
+
R
e
d
-
G
re
e
n
-
B
lu
e
-
W
h
it
e
-
Green
Green
W2
Cold
White
Red
Red
W1
Warm
White
V+
V+
V+
V+
V+
V+ LOAD = RGB
V+ LOAD = RGBW
V+ LOAD = Ai Dim
V+
V+
LOAD = DW
LOAD = White
Blue
Blue
W3
Warm
White
White
W4
Cold
White
Note: A maximum cable size of 14 AWG
(2.081mm 2 ) can be used directly within
the terminal block contacts.