ABX Pentra 80 RAB108EA, Руководство пользователя

Страница: 159 / 306

Set tings
Soft parameters
Pentra 80 - User Manual - RAB108EA
5–7
2.2.4. Instrument Logs
When a reagent is replaced, an instrument calibration is performed, and/or a maintenance
operation is carried out, a report of these interventions is automatically created in the ap-
propriate instrument log (Reagents, Calibration, or Maintenance).
When these boxes are checked (see Fig. 5–2, page 5-5), a prompt requiring comments, is au-
tomatically displayed (see Fig. 5–3, page 5-7).
Fig. 5–3 Comments dialog box
From the Soft parameters screen, select the «Edit» key, then select the appropriate boxes for
your applications.
Once your selections have been made, select the «OK» key to confirm your selections.
2.2.5. Identification option
Fig. 5–4 Identification option
This option must be setup according to the specific working order of the laboratory opera-
tions Section 4,
1. Workflow , page 4-3.
▼
Identification Option:
◆ Barcode: check this option if all tubes are going to be identified by barcode labels.
◆
Rack/position: Check this option if samples With and Without barcode labels are going to
be analyzed on the instrument.