ABX Pentra 80 RAB108EA, Руководство пользователя

Страница: 78 / 306

Pentra 80
3–22
Pentra 80 - User Manual - RAB108EA
3.2. Closed tube sample setting
The operator is allowed to run within run samples in both Manual Mode and Rack Mode.
◆ The «Within Run Data Grid» must be opened when performing a sample repeatabil-
ity cycle!
◆ Each tube of the rack is analysed the number of times specified by the «sampling
number».
3.3. Running cycles
The Within Run test must be done on a fresh normal whole blood sample.
3.3.1. Manual mode
Open the «Within Run Data Grid» screen (see Fig. 3–18, page 3-20).
Select the test (CBC or DIFF) by pressing the CBC/DIFF key of the grid (see Tab. 3–3: Within
Run keys, page 3-21).
Select the «STAT» key of the generic toolbar Section 1, 4.2. Contextual toolbar description ,
page 1-15.
Once the «STAT» key has been selected, the tube holder door opens. Place the sample tube
in the appropriate position of the tube holder.
Close the tube holder on the rear position; the analysis cycle begins.
Rerun the sample several times.
The Within Run is complete once the operator exits the «Within Run Data Grid» screen.
3.3.2. Rack mode
Position the tube in any rack.
If there is more than one sample tube placed in the rack, each tube will be analyzed
the number of times specified by the «Sampling Number».
Open the «Within Run Data Grid» screen (see Fig. 3–18, page 3-20).
Select the test (CBC or DIFF) by pressing the CBC/DIFF key of the grid (see Tab. 3–3: Within
Run keys, page 3-21).
Place the rack in the Rack Loader.
Select the «Start Rack» key Section 1, 4.2. Contextual toolbar description , page 1-15.
Fig. 3–19 Closed tube mode setting
Enter the number of sample takes to be per-
formed on the sample tube for Rack mode.