4
3. Safety information
!WARNING!
To avoid fire and injury, please note the following:
•
Securely fasten the device in a dry location in the
building.
•
Ensure sufficient ventilation for the alarm centre.
•
Do not expose the alarm centre to temperatures
under 0 °C or above 50 °C.
•
The alarm centre is designed for indoor use only.
•
Humidity must not exceed 90% (non-condensed).
•
Ensure that no metal objects can be inserted into the
equipment from outside.
•
Ensure that the power supply is disconnected before
carrying out any work on the alarm centre.
!Caution!
Please observe the following precautionary measures
to ensure trouble-free operation of your system.
•
The alarm centre is supplied with power from the
built-in PSU.
•
The PSU is connected to the 230 V AC domestic
mains network over a separate, electrically protected
line.
•
Connection work to the domestic mains network is
subject to country-specific regulations.
•
Emergency standby power is supplied by an internal
rechargeable battery.
•
The maximum power consumption of the connected
components must not exceed 1 A at any time.
•
Always replace fuses with ones of the same rating,
never higher.
!IMPORTANT!
On burglar alarm centres in general:
Improper or careless installation work may lead to
misinterpretation of signals and false alarms. The
costs resulting from the deployment of emergency
services (e.g. fire or police) are borne by the operator
of the equipment. Therefore, please read the
instructions very carefully and follow the installation
instructions for lines and components precisely.
