Abus RWM450, Руководство пользователя

Страница: 53 / 63

– 53 –
The mounting site must be
• firm
• dry
• free of dust, grease or loose paint,
etc.
Application:
a) Remove the information sticker
and the protective film from the
self-adhesive surface (Fig. 3) of the
magnetic holder.
b) Press the adhesive surface of the
magnetic holder for approx. 10
seconds firmly onto the mounting
surface.
c) Fit the alarm unit onto the
magnetic holder.
d) The adhesive bond will reach its
final strength after approx. 72 hours.
e) If required, the unit can be remo-
ved from the magnetic holder by
pulling it gently vertically away 1.2 Adhesive mounting using optional
fixing material (thin double-sided
adhesive film) as per vfdb (German
Fire Protection Association) 14/01
(Q) and EN14604:2005/AC:2008 in
addition to 1.1
The additional use of this optional
adhesive produces an
• extremely firm
• and long-lasting joint between the
alarm unit and the fixture and thus
with the installation site.
• The alarm unit cannot now be
removed by pulling it from the
magnetic holder; this means signifi-
cantly greater security against
unauthorised removal, theft etc.
Only use this method of fixing when
you are absolutely certain that the
unit must remain permanently fixed
and that it should not be removed.
Fig. 3
GB