German
7. FAQs
No
Questions
Answers
1
What does it mean to pair
monitor and camera and
how does it work?
Pairing establishes the exclusive, encrypted wireless
connection between the monitor and camera.
To connect a camera to the monitor, proceed as follows:
•
Tap the menu icon.
•
Tap on "Camera overview".
•
Supply the camera with power. Now the status LED on
the front of the camera should light up continuously for
10 seconds , and then flash . After another 5 seconds,
the camera will emit a pairing tone at regular intervals.
•
Click on "Add camera".
•
Now the LED should light up permanently for 3
seconds. After 10 sec. the camera is added to the
monitor. After successful teach-in of the camera, an ID
appears in the camera overview.
•
Then click on "Stop adding".
•
Exit the menu to see the live image of the camera on
the monitor.
2
What could be the causes
that no image is displayed
on the monitor?
If you have no signal, please check the following:
•
Is the camera connected to the mains (is the LED red)?
•
Is the monitor loaded?
•
Are the camera and the monitor connected (see
question 1)?
•
Is the camera within range of the monitor?
•
Is the signal between camera and monitor disturbed?
3
What could be the causes
that the device does not
record when moving?
Please check the following points:
•
The sensitivity of the motion detection increases if
necessary.
•
Whether the recording schedule is active
•
Whether motion detection is active
4
What could be the reasons
for the device not recording
even though a schedule has
been set?
Possible causes could be:
•
Are the date and time set correctly?
•
Is an SD card inserted? Is the SD card full and the ring
memory inactive?
•
Have you formatted the SD card? This must be
formatted before the first use.
•
No movement was detected.
5
What could be the reasons
for the camera not pairing to
the monitor?
Please check the following points:
•
The camera has no power supply.
•
Is the camera in pairing mode? (After power is supplied,
the status LED must flash and emit the pairing tone).
