German
2.
Connect the power cable to the connector on the camera and feed the cables into the wall.
3.
Fasten the wall plate of the bracket with the enclosed screws.
4.
Insert the ball joint and put on the cover. The fixing ring is then screwed on a little.
5.
Now align the camera to the roughly desired coverage area and tighten the fixing ring.
Option 2: Surface power supply
1.
To start the installation, use the drilling template or unscrew the bracket to mark the required 3
drill holes with its wall plate at the desired location of the camera. Drill the 3 holes and insert the
enclosed dowels. Feed the cable through one of the recesses in the wall plate. Fasten the wall
plate of the mount to the wall using the enclosed screws.
2.
Insert the ball joint and put on the cover. The fixing ring is then screwed on a little.
3.
Now align the camera to the roughly desired coverage area and tighten the fixing ring.
4.
Use a commercially available weatherproof installation box / junction box (width and height min.
105 mm, depth min. 35 mm) for a waterproof installation. Feed the camera cable into the box
and run the cabling through there. For weatherproof installation of the box, follow its installation
instructions.
