Absco Industries
Assembly Instruction Manual
ABSCO GABLE CARPORT
MODEL: GCPDN2
6.0mW x 6.0mD x 2.98mH
Model: GCPDN2
8/06/23
9
1.
Arrange the six edge beam
pieces as shown on the left.
2.
Nest the Inner edge beams
inside the outers.
Check for straightness.
When happy with the fit and the
assembled length is 5920 mm
proceed to fastening.
Fasten all with tek screws at 300
centres.
TIP: The top side of the beam
needs wafer head teks. The
underside of the beam can be
hex head tek screws
3.
Remove all screws for the
two outer edge beam pieces
ZACO117.
This will allow access to fit the
columns later.
Repeat these steps again we
need two edge beams.
EDGE BEAM
ZACO196
ZACO1
17
ZACO1
18
ZACO1
18
ZACO1
18
ZACO1
17
Inner edge beams ar
e 1973 mm
Outer edge beams
2750 mm
1585 mm
1585 mm
5920 mm
Outer
Inner
- That completes the side beam assembly -
